60mm Box Folder Gluer Machine Fully Computerized Control folding gluing 300Sheet/min

Inline Flexo Folder Gluer Machine Box Folder Gluer Machine From China Fully Computerized Control With High Speed
 
General Specifications

1. TP-CR Series open & close type flexo folder gluer represents of Quality, Consistency, Efficiency and Economic.
2. High speed inline top flexo print casemaker with down folding provides a complete carton boxes producing solutions.
3. The machine is designed and made to high quality and safety standard, stable and consistency high printing quality maximize the production efficiency.

Main Parameters

 
 
FEEDING SECTION

1. PLC control with HMI touch screen for operation.
2. Lead edge feeder with 3-4 shafts feeding box, benefits for all kind of cardboard.
3. Dust collection system use 4 suction blowers with groups of brushes.Anti-static dust removing system Optional.
4. Servo Control Non-crush feeding system Optional.Skip feeding device in order to produce large boxes.
5. Side baffles are computerized control or by order management.lFront guide is quickly manual adjusted, and backstop is motorized control.
6. Two groups of feeding roller, upper roller covered with rubber, lower roller engraved with slot
7. Motorized units open and close with alarm.
8. Gaps are motorized control with digital display.
9. Frequency inverter drive with variable suction control.

 
PRINTING SECTION

1. PLC control with HMI touch screen for operation.
2. Top print, Vacuum transfer system is coated with durable ceramic for longer life time.
3. Vacuum transfer system greatly improves the printing accuracy and would overcome warp boards issues.
4. Rubber and Anilox roller are made of A-class seamless pipe.
5. USA ARO diaphragm ink pump.
6. Auto zero- set for printing position.
7. All vacuum transfer wheel bearings with independent grease fitting for lubrication.
8. Servo control of register.
9. Automatic washing system.
10. Laser engraved ceramic anilox roll, 250-350LPI.
11. Rubber Roller as standard, and chamber blade system is Optional, Doctor blade “Chamber” type would be suggested for high quality printing, hence this would also be a cost saving on the ink material.
12. Surveillance System for checking cardboard transmission situation.

 
 
SLOTTER CREASER SECTION

1. PLC control with HMI touch screen for operation.
2. 8 shaft structure, pre-creasing, big-creasing, thin-creasing, slotting.
3. Slotting boss and Creasing wheels are simultaneously co-adjusted for keeping cutting accuracy and avoiding slotting knife worn away.
4. Gaps adjusted computerized control with digital display.
5. Slotting boss movements adopts linear guiding system match with ball screw,
6. Slotting boss adopts opposite insert structure, stable moving.
7. Dual slotting system Optional.
8. Auto zero- set for slotting knife.
9. Slotting Register servo control.
10. Middle knife movement.
11. smooth movement.

 
DIE CUTTER SECTION

1. PLC control with HMI touch screen for operation.
2. Die-cutting cylinder adopts Heavy duty structure.
3. Servo control of register.
4. Speed compensation device system allow operators to adjust the speed ratio between anvil and die mould cylinders.
5. With automatic grinding system.
6. Automatic back to zero position.

 
 
FOLDER GLUER & COUNTER EJECTOR
 

1. PLC control with HMI touch screen for operation.
2. Top printing with down folding.
3. Independent servo control of folding gluer side belts, speed can be adjust freely.
4. Independent servo control of guiding wheels for tracking box folding edge to make sure accurate folding.
5. Main belts with vacuum blower for accurate transmission.
6. Full servo control of counter ejector jobs to make sure precision counting and ejecting.

Our Service

Before Sales Service

Study Customer's project and products as more as details, providing customer with suitable offers, supporting customer with Factory Layout, Machine Layout, messge or email feedback within 12-24 hours.

After Sales Service

1. Whole Machine 1 year Warranty, Feeding Transmission Box 3 Years Warranty.

2. Working life time service provided to support you secure your investment.

2. Providing customer with Machine Foundation Drawing, supporting customer for foundation constraction.

3. Installation and Training Service

3.1 Once machine reach to you, we will dispatch 1-2 qulified technician to you for handle machine installation.

3.2 Installation and Training will be carried out for 15-20 days, 3 days for installation and Machine testing, and Rest days for trainning.

3.3 Foundation Drawing, Manual Book, Electric Drawing, 3D Drawing.

3.4 Video Explanation for Machine Operation, Video Explanation for Machine Maintaining.

Remote Control Service

1. Remote Support allows to connect to equipment and resolve many issues remotely.

2. Remote Control for future sofewear updating.

Spare Parts Quickly Supply Service

1. We take pride in the fact that we manufacture our own original spares, and can confidentially guarantee with full assurance that our customers are getting the best quality-price ratio.

2. Another bonus we offer is a well-stocked spare parts store which delivers the parts to you quickly and efficiently.

For more infomation, please feel free to contact with us!
THANK YOU!!!